Vibratory Polisher CORMAK PVT8KG

Vibratory Drum Polisher CORMAK PVT8KG

Vibratory Polisher CORMAK PVT8KG is designed for polishing, rust removal, degreasing and deburring workpieces using appropriately selected finishing media. The drum, with a diameter of 380mm and a maximum load capacity of 8kg, allows workpieces up to 280mm in size to be processed.

Main advantages of the PVT8KG vibratory polisher

Vibratory finishing uses the relative movement of workpieces and finishing media. It helps reduce manual cleaning and surface finishing operations. Selecting the appropriate abrasive media, batch composition and cycle time allows the process to be adapted to the material, component geometry and desired finish.

• Four finishing processes – polishing, rust removal, degreasing and deburring in a single machine.
• Drum Ø380mm – provides working space for processing individual components or batches of small workpieces.
• Maximum load capacity of 8kg – the combined weight of the workpieces and finishing media must be taken into account when preparing a batch.
• Maximum workpiece size of 280mm – allows components within the specified size limit to be processed.
• 230V / 50Hz power supply – allows connection to a single-phase electrical supply with suitable parameters.

Construction and finishing technology

The vibratory drum polisher is equipped with a motor rated at S1 40W and a drum with a lid. Plastic finishing media containing abrasive particles can be used in the process. Their shape and properties should be matched to the material being processed, the size of the burrs and the required surface quality.

Processing conditions and cycle times

The approximate degreasing time is 30 minutes, while rust removal takes 2 to 6 hours. The result depends on the surface condition, the finishing media used and the drum fill level. Wet finishing processes use water and a suitable processing compound in accordance with the user manual and the recommendations of the media supplier.

Applications

As a vibratory deburring machine, the equipment can be used to remove small burrs and finish edges. The polisher is suitable for workshops and production facilities preparing components for subsequent manufacturing stages. It is advisable to test the selected process on representative workpieces before proceeding with regular processing.

Technical specifications

Standard equipment

• Drum with lid.

Finishing media not included

• Abrasive material / plastic finishing media.