Category:
CNC Press Brakes – ELITE DA-53TX / DELEM
Hydraulic Press Brake CORMAK CNC SERVO ELITE 200×3200 DA-53TX
Reference:
ELITE 200×3200
CORMAK press brakes are advanced machines designed for precise sheet-metal bending using properly matched punches and dies. Our offer includes models equipped with the standard DELEM DA-53TX controller and, optionally, DELEM DA-53T, DA-58T, DA-66T, DA-69T and CYBELEC 12 controllers providing a wide range of functions to perform even the most demanding bending tasks.
Polish manufacturer
Top Quality
Warranty service
and post-warranty service
CE certificates
We comply with EU standards
12 / 24-month warranty
Secure purchase
The presented configuration represents the most frequently chosen equipment by our customers – a proven and efficient choice for serial production.
Main Features:
-
Front supports: 2 pcs on linear guides, ensuring stability during bending operations.
-
Y1, Y2 axis adjustment: automatic
-
Back-gauge adjustment (X axis): servo drive with encoders
-
R-axis adjustment: servo drive with encoders
-
Automatic crowning compensation
-
Punch clamping: quick-change AMADA-type mounting system allowing rapid tool replacement.
Available configurations are tailored to production needs and the type of processed workpieces – machine specifications are defined individually according to application and technological requirements.
Technical Parameters
| Max. bending thickness (S235) | up to 8.0 mm |
| Nominal pressure | 2000 kN |
| Maximum bending length | 3200 mm |
| Frame throat depth | 320 mm |
| Maximum ram stroke | 200 mm |
| Maximum opening height | 480 mm |
| Distance between uprights | 2700 mm |
| Back-gauge travel | 600 mm |
| Motor power | 15.0 kW |
| Length | 3300 mm |
| Width | 1800 mm |
| Height | 2900 mm |
| Weight | 11,300 kg |
Automatic back-gauge (X-axis) and R-axis control (manual option available). The R-axis facilitates bending of larger radii, e.g. in step-bending processes.
Optional servo-motor adjustment of fingers in axes Z1, Z2, R1, R2, X1, X2.
For a satisfactory result of step bending, it is necessary to perform certain calculations that require knowledge of several key parameters related to the bending process – these are:
- Arc length – the distance between the ends of the curved part of the bent sheet, measured along the inner side of the bend;
- Number of bends – the number of individual bends that must be performed to obtain a bent sheet with a defined radius; the greater the number of bends, the smaller the angle of each bend, resulting in a smoother curve;
- Distance between bends – the distance between individual bends performed during the process.
Although the step bending process may seem quite complex, the machines and software available from CORMAK are so advanced that in many aspects they completely relieve the operator of these calculations.
Automatic crowning compensation
Ensures that the same bending angle is maintained along the entire bending length – (option*)
Manual crowning compensation (option*)
Ensures a consistent bending angle across the entire working length – (option*)
High-quality components:
- Electrical components from Schneider / Delta / Eaton
Control and Functionality:
DELEM DA-58T
- Equipped with a 10-inch touch screen mounted on a movable arm, providing flexibility across the entire working area of the machine.
- Programmability: ability to store up to 2000 programs, with 30 steps each, enabling flexible adaptation to various tasks.
- Ergonomic Operation: intuitive interface with English shortcuts ensures quick adaptation for the operator.
Optional DELEM controllers available: DA-53T+2D, DA-66T, DA-69T or CYBELEC 12
DA-53T+2D
Display
- 10.1" TFT LCD touchscreen
- Full-colour
External software
- optional offline Profile-53TL workstation license (creation of bending sequences on a PC)
System
- Windows operating system
- 200 MHz processor
- 1 GB internal memory
- Commands
- Control logic preventing axis collision
Functions
- Library of punches and dies (30 punches & 60 dies) – descriptive and graphical library
- Program library with graphical preview and product catalogue management
- Material database (possibility of adding new bending materials)
- Creation of the bent part drawing directly on the controller display (2D)
- Automatic creation of the bending program based on the product drawing (2D)
- Real-time 2D display of the bending sequence on the machine
- 2D bending simulation with collision preview (step-by-step process)
- Warning message system (e.g. exceeding tool strength limits)
- Option to change bending sequence and modify individual program steps
- Possibility to input and save corrections in memory
- Manual operating mode available
- Manual positioning of backgauge axes
- Collision-prevention logic for X, R, Y1, Y2 axes
- Automatic calculation of ram stroke
- Automatic calculation of bending force depending on material type
- Automatic backgauge positioning
- Automatic calculation of internal radius and material development
- Backup creation for products and tools
- USB port
DA-58T
Display
- 15" TFT LCD touchscreen
- Full-colour
External software
- optional offline Profile-53TL workstation license (creation of bending sequences on a PC)
System
- Windows operating system
- 200 MHz processor
- 4 MB RAM
- Max. number of programs: 9999 (25 steps max.)
- Max. number of step repetitions: 99
- Commands
- Collision-prevention logic for working axes
Functions
- Library of punches and dies /30 punches & 60 dies/
- Descriptive and graphical library
- Program library with graphical preview and product catalogue
- Material database /possibility to add new bending materials/
- Drawing creation of bent part on the controller display (2D)
- Program generation based on the product drawing (2D)
- 2D real-time display of bending process on the machine
- 2D bending simulation with collision detection (step-by-step)
- Warning messages (e.g. tool overload alerts)
- Editable bending sequence with individual step modifications
- Manual operation and axis positioning
- Collision-prevention logic for axes X, R, Y1, Y2
- Automatic calculation of ram stroke
- Automatic force calculation depending on material type
- Automatic backgauge positioning
- Automatic calculation of internal radius and flat length
- Backup creation for products and tools
- USB port
DA-66T
Display
- 17” TFT LCD touchscreen
- Full-colour
External software
- optional LITE T2D workstation license (creation of bending sequences on a PC)
System
- Intuitive control interface with commands
- Stable Windows CE operating system
- 64 MB RAM
- Max. programs: 1000 /1 GB/
- Max. step repetitions: 99
Functions
- 2D drawing creation directly on the controller screen
- Automatic program generation based on part drawing (2D)
- Automatic calculation of stroke and bending force according to material
- Automatic backgauge positioning according to bending program
- 3D visualisation of the bending process (step-by-step simulation)
- Automatic finger positioning behind die and punch segments
- Collision detection and tool overload warnings
- Change of bending order and editing of individual program steps
- Automatic flat pattern calculation
- Manual control of each backgauge axis (navigation dial)
- Manual operating mode
- Material database and punch/die libraries
- Program library with graphical preview and product management
- Stroke and operating hours counter
- USB port
- Backup creation for tools and products
DA-69T
Display
- 17” TFT LCD touchscreen
- Full-colour
External software
- optional LITE T3D workstation license (creation of bending sequences on a PC)
System
- Intuitive controller with commands
- Stable Windows CE operating system
- 64 MB RAM
- Max. programs: 1000 /1 GB/
- Max. step repetitions: 99
Functions
- DXF file import
- 3D import of IGES & SAT formats from LITE T3D software
- 3D profile creation directly on the controller display
- Automatic bending program generation based on 3D part drawing
- Automatic stroke and bending force calculation according to material
- Automatic backgauge positioning
- 3D bending simulation (step-by-step visualisation)
CYBELEC 12
Display
- 12” TFT LCD touchscreen
- Full-colour
System
- Intuitive control interface with commands
- Stable Windows CE operating system
- Max. punches: 100
- Max. dies: 100
- Max. programs: 300
- Max. step repetitions: 24
- Max. materials: 10
Functions
- User-friendly HMI interface
- 2D profile drawing and 3D visualisation
- Automatic bending sequence
- Highest bending precision thanks to advanced algorithms
- Tandem operation
- Tool import support
- Pre- and post-bend programming
- Angle measurement support
- Barcode reader support
- Industry 4.0 ready and configurable
The machine combines advanced technology with simplicity of operation, making it an ideal choice for both precision manual work and efficient serial production. High-quality components and advanced safety systems ensure reliability and operator protection.
Safety
Laser safety system
Included as standard: a top-class laser safety system protecting the operator and doubling the bending process speed.
We do not compromise on safety! Top-quality hydraulic connections and safety valves designed in Poland.
Beware of pseudo safety systems like light curtains or gates – they do not comply with CE norms and may endanger workers’ safety. As an employer, you are responsible for the well-being of your staff!
CE-compliant safety enclosures
Ergonomics and Additional Features:
- Mobile controller on articulated arm
- LED lighting: increases work comfort and safety
- Front supports on linear guides
- Follow-up sheet supports (option*)
Servo-driven follow-up supports enable bending of larger sheets by lifting them synchronously during bending to maintain a constant angle and prevent deformation.
We care about our clients’ safety – our press brakes are equipped with numerous advanced safety features, including clear markings, side guards, rear safety gates, and easily accessible emergency stop buttons.
Each machine is supplied with a detailed operating manual in English.
Having a CE declaration does not automatically mean the machine is safe — what matters are the systems it is equipped with!
SCO – Oil Cooling System
Included as standard – ensures stability of operating parameters even during long and continuous operation.
Tool clamping systems:
- Divided multi-groove, four-sided dies and sectional punches included as standard
- The standard system in CORMAK press brakes is the manual AMADA-type (European) quick-change system for easy tool replacement
- Punches are side-mounted and locked using bolts
Die and punch selection
For best results, proper selection of die and punch is crucial. CORMAK press brakes continuously measure bending parameters and can automatically adjust deviations during operation for optimal results.
Depending on press force, divided punches and dies may vary in length.
Phone consultations with a specialist
You can always rely on expert support.
Cooperation terms
- 24-month warranty
- Machine is brand new
- Warranty and post-warranty service provided by the supplier
Training and Machine Commissioning
It is possible to arrange professional training and machine commissioning carried out by a Cormak technician — this service is priced individually.
Contact our advisor to get more information.
*The price quoted is for the machine itself, excluding optional/additional equipment, installation, transport and training — please contact our consultant for more details.
See instruction videos
▶
Are you interested in this product?
Contact our consultant
Reviews
Have you shopped with us? Let us know and share your experience. Help others make the right decision.
Leave a review
See also
Double-click to enlarge
